HP TouchSmart IQ520 - Desktop PC Manual page 49

3 Remove the optical disc drive cover by lifting the bottom edge with your finger or a screwdriver, and
then rotating the cover out and away from the computer. There are several tabs and two guide pins
holding the cover in place, so be careful not to break the cover by applying too much force.
4 Make sure the wireless keyboard and mouse receiver (A) has been removed. See "Opening the
HP TouchSmart PC" on page 3. Remove the nine screws that secure the back cover to the chassis. Four
of the screws are located along the bottom edge of the back cover, two are located on the sides of the
optical drive, and three are located in the connector area.
A
Upgrading and Servicing Guide
13