Optical Drive - HP Presario CQ32-100 - Notebook PC Maintenance And Service Manual

Optical drive

Description
DVD±RW SuperMulti DL Drive with LightScribe
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory/wireless module compartment cover (see
6. Remove the hard drive cover (see
Remove the optical drive:
1. Position the computer upside down with the front toward you.
2. Remove the Phillips PM2.5x5.0 screw (1) that secures the optical drive to the computer.
3. Use a flat-bladed screwdriver or similar tool to push the drive bracket to the left (2) to release the
optical drive.
4. Remove the optical drive (3).
5. If it is necessary to replace the optical drive bracket, position the optical drive with the optical
drive bracket toward you.
Battery on page 40).
Hard drive on page
Memory module on page
50)
Component replacement procedures
Spare part number
608021-001
608022-001
41)
53