Chapter 4 Using The Hp Management Console - HP T5135 - Compaq Thin Client User Manual

Table 4-3 Tools Menu (continued)
Report Management
Authentication Management
Rules
Status Walker
Status Snapshot
Table 4-4 Device Menu
Check Connection Status
Add
Delete
Manual Group
Send Task
Shadow
Reverse Shadow
Power Management
Get Device Asset
Information
Properties
44

Chapter 4 Using the HP Management Console

Manage the reports of the Devices and the Tasks so that the user can get the required reports
according to the customized conditions.
Refer to Configuring the Repository on page 201
Key Management—Manage the communication keys such as add, update, import and export
options, etc.
Gateway Access Control—Decide if a specified gateway is an authenticated gateway. If not,
the gateway will be banned and cannot communicate with the Management Server.
Applies tasks automatically to devices that meet specific criteria either when they are first
discovered, turned on or rebooted, or at a scheduled time.
Refer to Using Rules to Automatically Apply Tasks to Devices on page 86
This tool makes a list of all the IPs available and walks to them; taking back their status
information and displaying it.
Refer to Status Walker Configuration on page 187
This tool takes a snapshot, creates a report of the devices' status and stores it in the server
to be displayed when the tool is opened.
Refer to The Status Snapshot on page 223
Check the network connection status of the agents via Ping and Trace Route.
Add a new device.
Refer to Adding Devices Using MAC Addresses on page 154
Delete the selected device.
Add Folder, Rename or Delete.
Send a Task Template task to the selected device.
Refer to Applying Tasks to Devices on page 76
Attempts to shadow the selected device.
Refer to Shadowing Devices on page 69
Attempts to reverse shadow the selected device.
See Shadowing Devices on page 69
Reboot—Sends a command to reboot the selected device.
Wake on LAN—Sends a command to the selected device to start it up.
Shutdown—Sends a command to shut down the selected device.
Refer to Power Management on page 71
Get the specific information of the selected device, such as General, Software, Hardware,
Hotfix, Network, Configuration and other extended properties, etc.
Displays the properties for the selected device.
Refer to Displaying Device Properties on page 49
for details.
for details.
for details.
for details.
for details.
for details.
for more information.
for details.
for details.
for details.