5
Common Tasks
Performing a Task
In order to perform a task on a remote device you must first define a template which provides the
instructions to be executed or new settings, then apply that template to the device. The basic procedure
is described below. For a more detailed explanation, please refer to
on page 72
and
1.
To define a template, double-click an existing template in the Template Pane, or right-click a
template then select Properties from the pop-up menu.
2.
Specify your requirements for the template using the options available, then click the Save as
button and enter a name for the new template.
3.
To apply the template to a device or group of devices, either drag the template from the Template
Pane and drop it on to the device or group,
or
right-click the device and select Send Task from the pop-up menu to display the Template
Chooser. Select a category then a template from the templates list, then click Next.
90
Chapter 5 Common Tasks
Task Management on page
75.
Task Template Management