Device Manager will not execute tasks. Clicking in an option field will cause the Description box to
display a short description of that option.
1.
Select Valid Time and Timeout in the left-hand tree pane of the Configuration Management
dialog box.
2.
Set the time, in minutes, for each category: Valid Time, General Timeout, General Batch
Interval, PXE Batch Interval and FTP Batch Interval.
Set the amount, in devices, for each category: General Batch Amount, PXE, Batch Amount
and FTP Batch Amount.
Check the Exclude Working Hours option box to input the start and end time of working hours.
Clicking Restore defaults will reset the timeout settings to their defaults and set the working hours
to 9.00 start and 17.00 end.
3.
Click Apply to save the new settings, then OK to exit.
184 Chapter 7 Configuration Management