9.
Verify that you have sufficient administrative rights to install the OS and other software
onto each node.
10. Verify that all of the required hardware is properly installed and cabled (see
For information about best practices for this step, go to:
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/library/ServerHelp/
f5abf1f9-1d84-4088-ae54-06da05ac9cb4.mspx
NOTE:
by your system.
11. Determine all the input parameters required to install your clustered system and record
them in the table in
Microsoft discussion of this topic at:
http://technet2.microsoft.com/windowsserver/en/library/
f5abf1f9-1d84-4088-ae54-06da05ac9cb41033.mspx?mfr=true
Figure 2-1 Example cluster hardware cabling scheme
Gathering Required Installation Information
Use
Table 2-1
Record the information in the Value column next to each description.
22
Administering the cluster
Figure 2-1
is an example only. It might not represent the actual cabling required
"Gathering Required Installation Information" (page
to record the input parameters you need to install the OS and configure the cluster.
Figure
2-1).
22). Also see the