Table of Contents
Advertisement
Operating Basics
Connecting
To connect the internal modem cable, follow the steps below.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Modem Jack
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as a DVD-ROM drive,CD-RW/DVD-ROM
drive or HDD connected to a 16-bit PC Card, you might experience the
following modem problems:
1. Modem speed is slow or communication is interrupted.
2. Skips may occur in sound.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
4-26
Connecting the internal modem
Telephone
Jack
User's Manual
Advertisement
Table of Contents
