Supported Frequency Sub-Bands - Toshiba PTA40U-012009 User Manual

Supported frequency sub-bands

Subject to the radio regulations that apply in your country/region, your
Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels.
Consult your Authorized Wireless LAN or TOSHIBA Sales office for
information about the radio regulations that apply in your country/region.
Wireless IEEE 802.11 Channels Sets (Revision B and G)
Frequency Range Channel ID
Wireless IEEE 802.11 Channels Sets (11G Turbo Mode)
Frequency Range Channel ID
When installing Wireless LAN cards, the channel configuration is managed
as follows:
For wireless clients that operate in a Wireless LAN infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
For Wireless LAN cards installed in wireless clients that operating in a
peer-to-peer mode, the card will use the default channel 10.
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel(printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
User's Manual
1
2
3
4
5
6
7
8
9
10
11
12
13
6
2400-2483.5 MHz
2412
2417
2422
2427
2432
2437
2442
2447
2452
*1
2457
2462
*2
2467
*2
2472
5150-5850 MHz
2437
Wireless LAN
Note
*4
US only
C-3