TECRA A4
AC Power Cord and Connectors
The power cord's AC input plug must be compatible with the various
international AC power outlets and the cord must meet the standards for
the country/region in which it is used. All cords must meet the following
specifications:
Length:
Wire size:
Current rating:
Voltage rating:
Certification agencies
U.S. and Canada: UL listed and CSA certified
Australia:
Japan:
Europe:
Austria:
Belgium:
Denmark:
Finland:
France:
Germany:
In Europe, two conductors power cord must be VDE type, H05VVH2-F or
H03VVH2-F and for three conductors power cord must be VDE type,
H05VV-F.
For the United States and Canada, two pin plug configuration must be a
2-15P (250V) or 1-15P (125V) and three pin plug configuration must be
6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical
code handbook and the Canadian Electrical Code Part II.
User's Manual
Appendix D
Minimum 2 meters
2
Minimum 0.75 mm
Minimum 2.5 amperes
125 or 250 VAC (depending on country/region's
power standards)
No. 18 AWG, Type SVT or SPT-2 two conductor
AS
DENANHO
OVE
Italy:
CEBEC
The Netherlands:
DEMKO
Norway:
SETI
Sweden:
UTE
Switzerland:
VDE
United Kingdom:
IMQ
KEMA
NEMKO
SEMKO
SEV
BSI
D-1