Table of Contents
Advertisement
i.LINK (IEEE 1394)
Port
When multiple IEEE1394 devices are connected to a PC, the devices may
not correctly be identified. This problem may occur when Windows
restarted while the devices are connected or when the power to the
IEEE1394 devices is turned on before the PC is turned on. If it occurs,
disconnect the IEEE1394 cables and then reconnect them.
Back side
The following figure shows the computer's back side.
Video-out jack
Video-out jack
Modem jack
LAN jack
DC IN 15V
Security lock slot
User's Manual
Connect an external device, such as a digital
video camera to this port for high-speed data
transfer. Some models are equipped with a
i.LINK port. (Provided with some models)
Modem jack
LAN jack
The computer's back side
Plug a 4-pin S-Video connector into this jack.
The modem jack that lets you use a modular
cable to connect the modem directly to a
telephone line.
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10 megabits
per second, 10BASE-T), Fast Ethernet LAN
(100 megabits per second, 100BASE-Tx) and
Giga-bit. The LAN has two indicators. See
Chapter 4,
The AC adaptor connects to this socket. Use only
the model of AC adaptor that comes with the
computer. Using the wrong adaptor can damage
your computer.
A security cable attaches to this slot. The optional
security cable anchors your computer to a desk
or other large object to deter theft.
Operating
Basics, for detailes.
The Grand Tour
XP is
®
Security lock slot
DC IN 15V
2-5
Advertisement
Table of Contents
