Table of Contents
Advertisement
Problem
Some CD/DVDs run
correctly, but others
do not
Cannot write correctly
User's Manual
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software
Check the CD/DVD
Check the type of DVD/CD you are using.
The drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD (single/
multi-session), CD-ROM Mode 1,
Mode 2, CD-ROMXA Mode 2
(Form1, Form2), Enhanced CD
(CD-EXTRA), CD-G (Audio CD
only), Addressing Method 2
Check the region code on the DVD. It must
match that on the CD-RW/DVD-ROM drive.
Region codes are listed in the
drive
section in Chapter 2,
If you have trouble writing, make sure you are
observing the following precautions:
Use only media recommended by TOSHIBA
Do not use the mouse or keyboard during
writing.
Use only the software supplied with the
computer for recording.
Do not run or start other software during
writing.
Do not jar the computer during writing.
Do not connect/disconnect external devices
or install/remove internal cards during
writing.
If problems persist, contact your dealer.
Troubleshooting
'
s needs.
'
s documentation.
Optical Media
The Grand
Tour.
9-11
Advertisement
Table of Contents
