Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
To start the Setup Utility, turn on or restart the computer, and then press
to enter setup" is displayed in the lower-left corner of the screen.
2.
Select Exit > Load Setup Defaults, and then press enter.
3.
When the Setup Confirmation is displayed, press
4.
To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on
the screen.
The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the
computer restarts.
NOTE:
Your password, security, and language settings are not changed when you restore the factory
default settings.
enter
to save your preferences.
Using the Setup Utility 107
f10
while "Press <F10>