Optical Drive - HP Pavilion dv9500 - Entertainment Notebook PC Maintenance And Service Manual

Reverse this procedure to install a WLAN module.

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel and bracket.
Description
Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer (DL) support
HD DVD-ROM Drive with SuperMulti DVD±R/RW Double Layer support with LightScribe
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the optical drive:
1. Position the computer with right side toward you.
2. Remove the Phillips PM2.5×8.0 screw (1) that secures the optical drive to the computer.
3. Insert a thin tool, such as a paper clip (2), into the disc tray release access hole. (The optical drive
disc tray is partially ejected from the optical drive.)
4. Use the disc tray frame to slide the optical drive (3) out of the computer.
Battery on page 47).
Spare part number
462356–001
448006-001
448005-001
448004-001
Component replacement procedures 59