Switch Deployment And Configuration - HP BladeSystem bc2000 - Blade PC Installation Manual

●
IGMP response report delay and query interval configuring
●
Broadcast, multicast, and unknown packet storm control with a configurable threshold value
●
IEEE 802.3x flow control with manual configuration capability

Switch Deployment and Configuration

●
Supports any combination of HP bc1000, bc1500, bc2000, and bc2500 Blade PCs and future
compatible blade PCs
●
Default pre-configuration for immediate plug-in operation in the HP BladeSystem PC Blade
Enclosure
●
Communicate to any and all blade network adapters from any Ethernet external port
●
Manage the switch from IA enclosure firmware
●
Browser-based interface accessible from any switch Ethernet port
●
Menu driven console interface accessible from any switch port
●
Command line interface (CLI) with scripting capability accessible from any switch port
●
Telnet access to the CLI and menu-driven console interfaces accessible from any switch Ethernet
port
●
SNMP-based scripting with best-case HP recommended example scripts
●
Configurable forwarding MAC address aging (default is 300 seconds)
●
MAC address user management sorting on a per port and per VLAN basis
●
Manual (static) entries in MAC address table
●
Manual, or automatic IP settings using a DHCP or BOOTP server
● Ability to restore switch to factory default settings
● TFTP to upload and download (save, restore, and update) the switch configuration
●
Switch configuration retention after firmware upgrade
●
Human read/write configuration file for viewing, printing, and editing
●
Pre-configured customized port naming with respect to blade PC NIC connectivity
●
Per port bandwidth control of ingress and egress traffic
●
Ability to name ports on a per port basis
●
Full ability to enable and disable any port (both internal and external ports)
ENWW Switch Deployment and Configuration 29