Blade Workstation Clients; Personal Workstation Clients - HP BladeSystem bc2000 - Blade PC Administrator's Manual

Install and enable one of the following operating systems:
●
Windows XP Professional, 32-bit or 64-bit, with Service Pack 2 or 3
NOTE:
bit using the preinstalled version of RDP. This is due to the location (\windows\system32) of the
preinstalled RDP protocol files. In order to connect via RDP from an access device running
Windows XP 64-bit, you need to install RDP 6 into a folder other than \windows.
●
Windows Vista, Business or Enterprise, 32-bit or 64-bit, with or without Service Pack 1
● Linux RHEL4, 32-bit or 64-bit (update 5 or later)
●
Linux RHEL5, 32-bit or 64-bit (update 2 or later)
Install and enable one or both of the following:
●
RGS Receiver 5.1.3 or later
● RDP

Blade Workstation Clients

Hardware Requirements
●
HP Compaq Blade Workstation Client
●
HP dc72 Blade Workstation Client
●
HP dc73 Blade Workstation Client
● HP gt7725 thin client
Software Requirements
●
Blade Workstation Client series with RGS Receiver and HP SAM client in the image

Personal Workstation Clients

Hardware Requirements
●
HP Personal Workstation
Software Requirements
●
Windows XP Professional with Service Pack 2 or 3
●
Windows Vista, Business and Enterprise, 32-bit or 64-bit with or without Service Pack 1
●
Linux RHEL4, 32-bit or 64 bit (update 5 or later)
● Linux RHEL5, 32-bit or 64 bit (update 2 or later)
ENWW
The HP SAM Client is unable to connect from access devices running Windows XP 64-
Access Device Requirements 23