HP BladeSystem bc2000 - Blade PC Administrator's Manual page 45

5. Change appropriate connection settings.
6. Click the Save Settings button. Click OK in the message confirming that the settings were saved.
7. Select \etc.
8. Click Save.
9. Click the Connect button to connect
10. If the HP SAM client is closed, it should start automatically. If it does not start, right-click and
select Remote Graphics.
Additional settings can be set by manually editing the .SAM files (configuration files).
1. The HP SAM connection client searches first for the user-specific .SAM file, hprdc.sam.
2. It then checks the access device file, /root/writable/opt/hpsam/hprdc_accessdevice.sam.
Parameters found in the access device file replace or are added to the merged file.
3. Then, the connection client checks the file, /root/writable/opt/hpsam/hprdc_admin.sam.
Parameters found in the global file replace or are added to the merged file.
Refer to Configuration Settings on page 38
HP ThinPro GT Client for the HP gt7725 Thin Client
For the HP gt7725 thin client running HP ThinPro GT, use the following procedure to install or update
the HP SAM Client:
1. Edit the file /etc/apt/sources.list and verify the following line exists (if it does not, add it): deb
ftp://ftp.hp.com/pub/tcdebian gt7725 main non-free.
2. Save the file, then update the list with the following command: apt-get update.
3. Set your http_proxy environment variable, if necessary. Run the following command: export
http_proxy='http://web-proxy.yourcompany.com:8080' substituting your proxy
information. If you are using Synaptic, set the proxy information under Preferences > Network.
4. To install the HP SAM Client, run the following command: apt-get install hptc-sam-
client or use the Synaptic application to obtain the software.
Additional settings can be set by manually editing the .SAM files (configuration files).
1. The HP SAM connection client searches first for the user-specific .SAM file, hprdc.sam.
2. It then checks the access device file, /opt/hpsam/hprdc_accessdevice.sam. Parameters found in
the access device file replace or are added to the merged file.
3. Then, the connection client checks the file, /opt/hpsam/hprdc_admin.sam. Parameters found in the
global file replace or are added to the merged file.
Refer to Configuration Settings on page 38
Client.
ENWW
for a list of the options available for the Linux Client.
for a list of the options available for the HP ThinPro GT
Install and Validate the HP SAM Client Software 37