Manage Data Centers - HP BladeSystem bc2000 - Blade PC Administrator's Manual

To Delete an Access Device
NOTE: You cannot delete an access device while it is in use.
1. Type one or more parameters and click Search, or click Search to find all registered access
devices.
2. Select the check box next to the appropriate access device or devices.
3. Click Delete and OK.
Manage Monitor Layout
This allows you to create a new layout or to modify or delete an existing layout.
To Create a Monitor Layout
1. Click Create.
2. Type the monitor layout ID.
3. Type a description of the layout.
4. Select the Asset Groups associated with this monitor layout.
5. Click Save to add the new ID.
To Modify a Monitor Layout
1. If you want to change the name, description, or asset group of the monitor layout, click the link in
the Monitor Layout ID column and then change the desired settings.
2. Click Save to change the monitor layout ID.
To Delete a Monitor Layout
1. Select the check box next to the appropriate monitor layout.
2. Click Delete and then click OK.

Manage Data Centers

Data Centers in HP SAM are groupings of enclosures. Data centers serve only to save enclosure
passwords in order to enable the feature which allows users to power cycle blades from the HP SAM
Connection Bar.
NOTE: Version 4.20 or later Integrated Administrator (IA) software must be used on the HP
BladeSystem PC Blade Enclosure(s). By default, the IA software has a disabled SAM account. You
must enable the SAM account and create a password for the powercyle option to work.
The IA password for the built-in SAM account must be saved in HP SAM on the Manage Data Centers
page.
Blade power management in C-class enclosures (Blade Workstations) is not supported.
ENWW HP SAM Administrator Console Tabs 65