Show Rmon Events - HP BladeSystem bc2000 - Blade PC Reference Manual

show rmon events

The show rmon events User EXEC mode command displays the RMON event table.
Syntax
show rmon events
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the RMON events table.
Console> show rmon events
Index
---
1
2
The following table describes significant fields shown in the example:
Field
Index
Description
Type
Community
Owner
Last time sent
HP PC Blade Switch CLI Reference Guide
Description Type
------------- --------
Errors Log
High Broadcast Log-Trap
Description
An index that uniquely identifies the event.
A comment describing this event.
The type of notification that the device generates about this event.
Can have the following values: none, log, trap, log-trap. In the
case of log, an entry is made in the log table for each event. In the
case of trap, an SNMP trap is sent to one or more management
stations.
If an SNMP trap is to be sent, it is sent to the SNMP community
specified by this octet string.
The entity that configured this event.
The time this entry last generated an event. If this entry has not
generated any events, this value is zero.
www.hp.com
Community Owner
--------- ------
CLI
device Manager
RMON Commands
Last Time Sent
-------------------
-
Jan 18 2005
23:58:17
Jan 18 2005
23:59:48
20-15