Qos Map Dscp-Mutation - HP BladeSystem bc2000 - Blade PC Reference Manual

QoS Commands

qos map dscp-mutation

The qos map dscp-mutation Global Configuration mode command modifies the DSCP to
DSCP mutation map. To return to the default DSCP to DSCP mutation map, use the no form of
this command.
Syntax
qos map dscp-mutation in-dscp to out-dscp
no qos map dscp-mutation
Parameters
in-dscp — Specifies up to 8 DSCP values separated by spaces. (Range: 0-63)
n
out-dscp — Specifies up to 8 DSCP values separated by spaces. (Range: 0-63)
n
Default Setting
The default map is the Null map, which means that each incoming DSCP value is mapped to the
same DSCP value.
Command Mode
Global Configuration mode.
Command Usage
There are no user guidelines for this command.
Example
The following command changes DSCP values 1, 2, 4, 5 and 6 to DSCP mutation map value 63
Console config)# qos map dscp-mutation 1 2 4 5 6 to 63
18-30 www.hp.com HP PC Blade Switch CLI Reference Guide
.