802.1x Commands
dot1x re-authentication
The dot1x re-authentication Interface Configuration mode command enables periodic
re-authentication of the client. To return to the default configuration, use the no form of this
command.
Syntax
dot1x re-authentication
no dot1x re-authentication
Parameters
There are no parameters for this command.
Default Setting
Periodic re-authentication is disabled.
Command Mode
Interface Configuration (Ethernet)
Command Usage
There are no user guidelines for this command.
Example
The following command enables periodic re-authentication of the client.
Console(config)# interface ethernet e16
Console(config-if)# dot1x re-authentication
2-4
www.hp.com
HP PC Blade Switch CLI Reference Guide