Toner Smears Or Print Comes Off/Stain On Back Side - Epson WorkForce AL-M200DN User Manual

Problem
The output is too light.
Note:
If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Toner Smears or Print Comes Off/Stain on Back Side

Action
The toner cartridge may be low or need to be replaced. Confirm the amount of
toner in the toner cartridge.
1. Check the toner level on the Consumables tab of the Printer Status window of
Status Monitor.
2. Replace the toner cartridge as needed.
Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.
See Also:
"Usable Print Media" on page 102
Try changing the Paper Type setting on the print driver.
1. On the Paper/Output tab for Printing Preferences of the print driver, change
the Paper Type setting.
Disable Toner Saving Mode on the print driver.
1. On the Graphics tab in Printing Preferences of the print driver, ensure that the
Toner Saving Mode check box is not selected.
AL-M200 Series User's Guide
Troubleshooting 192