Epson WorkForce AL-M200DN User Manual page 146

Manual Enter Network
Setup (SSID)
Infrastructure
Ad-hoc
*
Factory default menu setting
Note:
This menu item appears only when the printer is connected to a wireless network.
Enter a name of up to 32 alphanumeric characters to identify the wireless
network. As the factory default menu setting, wireless_device is specified in
advance.
Configures a wireless network with access points.
*
Configures a wireless network without security encryp‐
No Security
tion.
Mixed Mode Configures a wireless network with the WPA-PSK-TKIP,
WPA-PSK-AES and WPA2-PSK-AES encryptions.
PSK
PassPhrase
Entry
Configures a wireless network with the WPA-PSK-TKIP en‐
WPA-PSK-TKIP
cryption.
PassPhrase
Entry
Configures a wireless network with the WPA2-PSK-AES
WPA2-PSK-AES
encryption.
PassPhrase
Entry
WEP Configures a wireless network with the WEP encryption
and specify a WEP key of 5 or 13 ASCII characters; or 10 or
26 hexadecimal characters.
Transmit Key
Configures a wireless network without access points.
* Configures a wireless network without security encryp‐
No Security
tion.
WEP Configures a wireless network with the WEP encryption
and specify a WEP key of 5 or 13 ASCII characters; or 10 or
26 hexadecimal characters.
Transmit Key
AL-M200 Series
Enter a passphrase of 8 to 63
alphanumeric characters.
Enter a passphrase of 8 to 63
alphanumeric characters.
Enter a passphrase of 8 to 63
alphanumeric characters.
Select the transmit key from Auto,
WEP Key 1, WEP Key 2, WEP Key 3,
and WEP Key 4.
Select the transmit key from WEP Key
1, WEP Key 2, WEP Key 3, and WEP
Key 4.
Using the Operator Panel Menus
User's Guide
146