Epson WorkForce AL-M200DN User Manual page 71

e Select the network, and then click Connect.
f Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008 R2 and Windows 7:
a Display Control Panel.
b Select Network and Internet.
c Select Network and Sharing Center.
d Select Connect to a network.
e Select the network, and then click Connect.
Setting Up the Printer for Shared Printing
One way to make a new printer available for other computers on a network is to use the Software Disc
supplied with your printer. Using the supplied CD is helpful in a way that it will install utilities
including Status Monitor as well. The following, however, describes the procedures for sharing a
printer on a network without using the supplied CD.
To set up a printer to be shared on a network, you need to set up the printer for network sharing and
install print drivers for the printer on every computer on the network.
Note:
You need to purchase an additional Ethernet cable at your own cost to connect a printer to an Ethernet
network.
Setting Up the Printer for Network Sharing
For Windows XP, Windows XP 64-bit Edition, Windows Server 2003, and Windows Server 2003 x64
Edition
1. Click Start (start for Windows XP) — Printers and Faxes.
2. Right-click the icon for your printer and select Properties.
3. From the Sharing tab, select Share this printer, and then enter a name in the Share name text
box.
AL-M200 Series
Printer Connection and Software Installation
User's Guide
71