Installation To Extension Columns / Ceiling Plate - NEC NP2200 Installation And Assembly Manual

Installation to Extension Column / Ceiling Plate
5 NOTE: Refer to accompanying instructions with ceiling plates (sold separately) for installing these models to
ceiling.
Screw projector mount assembly (A) onto extension column as shown in figure 5.1.
NOTE: For 3/4" extension columns, reducer ACC 913 will be required as shown in figure 5.2. Tighten swivel stop
screw against extension column, flush mount tube or reducer using 4 mm security allen wrench (B) as shown in
figure 5.3.
NOTE: Swivel stop screw is used to jam against threads of extension column, flush mount tube or reducer to
prevent any excess movement of projector mount assembly (A). Do not overtighten screw; overtightening screw will
damage threads making it difficult to separate products.
Skip to step 6.
A
fig. 5.1
Visit the Peerless Web Site at www.peerlessmounts.com
Accessories listed in the included sheet, as well as other parts,
can be ordered through Peerless by calling 1-800-729-0307 or
visiting www.peerlessmounts.com.
1 1/2" EXTENSION
COLUMN
(SOLD SEPARATELY)
UL LISTED EXT OR ADJ
SERIES)
ARROW
INDICATES
FRONT OF
MOUNT
SWIVEL STOP
SCREW
fig. 5.3
7 of 9
3/4" EXTENSION COLUMN
(SOLD SEPARATELY)
ACC 913
(NOT UL LISTED)
(SOLD SEPARATELY)
ARROW
INDICATES
A
FRONT OF
MOUNT
fig. 5.2
CMJ 455
(SOLD SEPARATELY)
ISSUED: 06-16-09 SHEET #: 055-XXXX-1
For customer care call 1-800-729-0307 or 708-865-8870.