Brother DCP-8110DN Network User's Manual page 47

Configuring your machine for a wireless network (For MFC-8710DW, MFC-8910DW and MFC-8950DW(T))
®
Windows Vista /Windows
If you are using your computer as a Registrar, follow these steps:
Note
• To use a Windows Vista
in advance. See the instruction supplied with your WLAN access point/router.
®
• If you use Windows
following the on-screen instructions. If you want to install the full driver and software package, follow the
steps uu Quick Setup Guide for installation.
1
(Windows Vista
Click the button and then Network.
®
(Windows 7)
Click the button and then Devices and Printers.
2
(Windows Vista
Click Add a wireless device.
®
(Windows 7)
Click Add a device.
3
Choose your machine and click Next.
4
Input the PIN which the LCD shows in step f and then click Next.
5
Choose your network that you want to connect to, and then click Next.
6
Click Close.
h
If your wireless device is connected successfully, the display shows Connected.
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.
®
(Windows )
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.
®
7
® ®
or Windows 7 computer as a Registrar, you need to register it to your network
7 as a Registrar, you can install the printer driver after the wireless configuration by
®
)
®
)
3
3
40