Brother DCP-8110DN Network User's Manual page 24

Configuring your machine for a wireless network (For MFC-8710DW, MFC-8910DW and MFC-8950DW(T))
(Macintosh)
1 The opening screen will appear automatically. Click Start Here OSX. Choose your machine and click
Next.
2 Choose Wireless Network Connection and then click Next.
c
Choose Yes, I have a USB cable to use for installation. and then click Next.
d
Follow the on-screen instructions to configure the wireless settings.
Note
• When the Available Wireless Networks screen appears, if your access point is set to not broadcast the
SSID, you can manually add it by clicking the Advanced button. Follow the on-screen instructions for
entering the Name (SSID).
• If the wireless setup failure screen appears, click Retry and try again.
After you have completed the wireless setup, you can proceed to the drivers and software
necessary for operating your device. Click Next in the installation dialog and follow the
on-screen instructions.
3
3
17