Install The Water Inlet Hose - Haier HWM55-7288P User Manual

Install the water inlet hose

1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: please check if the connection of the
water inlet pipe is proper
2. Connect the other ends to the water inlet valve .
( As figure 2)
Jointer of the
water inlet valve
Water absorption cushion
Check the connection between the water inlet
hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap, is firm,
so as to prevent dropping from improve Installation
position.
After finish washing cycle please pay attention to
5.
turn off the tap.
Take down the water inlet hose
1.Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
Jointer of the water inlet hose
the water inlet hose
Figure 2
the water faucet
Figure 1