Install the water inlet hose
Installing Quick Sink Adapter
When installing the quick sink faucet adapter to the faucet
1.First
remove the aerator from your faucet nozzle and determine thesize/tipe of the
faucet
2.Once you determine the size/tipe of the faucet
Thread End
3.Attach the silver faucet connector to the faucet
4.Attach the faucet connector to the water inlet hose and make sure that the rubber
washer is placed in between
5.Attach the other end of the water inlet hose to the washer water inlet
Check the connection between the water inlet
hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap,
and the connection between the water inlet hose and
washer are firm, so as to prevent dropping from
improve Installation position.
Take down the water inlet hose
1.Close the water tap.
2. Pull off the water inlet hose from the water tap
and washer
place the proper sized rubber washer into the silver faucet adapter
Faucet
Faucet Adapter
Quick Connector
Water inlet hose
Before using
Before using
follow the steps below
Outside Threaded End or inside
Washer