Dryer Use; Starting Your Dryer - Maytag MGD9700S - Gas Dryer Use And Care Manual

DRYER USE
f
CONTROLON 0 AUTOMATIC MANUAL EstlmatedTime IO High
Heavy Duty%
CYCLES
/Timed Dry Rema n_ng Medium
Wet O Casu Rapid Dry Less Air Only Off
Dompo U o r ,
Euper 0
Cool Down O Delicate
Cycle Complete O _ O O O O
_MANUAL_ DRYNEES TEMP EXTRA CYCLE
Extra Care O DRY TIME LEVEL CARE END
SIGNAL
Control Locked O Hold for 3
seconds to
JocR / unlock Pause
control
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
This manual covers several different models. Your dryer may not
have all of the cycles and features described.
The following is a guide to starting your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry in dryer and shut door.
3. Rotate the dial to select either an Automatic or Manual Cycle
then press the CONTROL ON button. The preset settings and
drying time for the cycle chosen will be displayed.
To use an Automatic Cycle
Point the dial to an Automatic Cycle.
Select DRYNESS LEVEL to adjust how dry you want the
load to be. The time displayed is an estimated length of
the cycle based on the Dryness Level selected. As the
cycle runs, the control senses the dryness of the load and
adjusts the time automatically for the selected Dryness
Level.
I ore
Less
O
DRYNESS
LEVEL
NOTE: Time is not adjustable for Automatic Cycles. Pressing
the Manual Dry Time (- or +) buttons will cause a triple beep,
indicating that the time cannot be changed.
• Press the EXTRA CARE feature button if this option is
desi red.
Press the CYCLE END SIGNAL button to set signal
volume to desired level.
Press and hold HOLD TO START button until dryer starts
(about 1 second).
16