System Administrator Guide - Xerox 5550B - Phaser B/W Laser Printer Administrator's Manual

PJL Command
@PJL XJAUSERNAME="username"
@PJL XJOBPASSWORD=value
@PJL XPERSONALJOB
@PJL XPROOFJOB
@PJL XSAVEDJOB
@PJL XSECUREJOB
@PJL XIGNOREFF
@PJL XLINETERMINATION=value
@PJL XMBFSIZE=value
@PJL XMEDIASOURCE=value
@PJL XMEDIATYPE=value
@PJL XPCLTRAYSWITCH=value
Values
Roman-8
characters
1-255
4-digit string (1-9)
n/a
n/a
n/a
n/a
ON, OFF
ON, OFF
ANY or any
supported media
size, such as
LETTER,
STATEMENT, and
EXECUTIVE.
ANY, TRAYn
ANY or any
supported media
type, such as
PAPER and
LABEL.
ON, OFF

System Administrator Guide

B-6
Phaser PJL Commands
Description
Sets the user name for Job
Accounting.
Assigns the job password used
by Secure Print.
Starts a Personal Print job.
Starts a Proof Print job.
Starts a Saved Print job.
Starts a Secure Print job.
Ignores FormFeed commands
when printing PCL blank pages.
Terminates a line.
Sets the media size for Tray 1.
Sets the media source.
Sets the media type.
Switches trays when a tray goes
empty. If AutoSelect is chosen as
the paper source (tray) in PCL,
then tray switching is always
active, regardless of the value.
When the current tray goes
empty, the printer attempts to
switch to another tray containing
the same size and type of paper.
This command only takes effect
when a specific tray, such as
Tray 2, is selected in the job.
When this command is ON, tray
switching still occurs when the
tray goes empty. When this
command is OFF, no switching
occurs and the user is prompted
to load paper.