Phaser Pjl Commands - Xerox 5550B - Phaser B/W Laser Printer Administrator's Manual

Phaser PJL Commands

The following table lists the most commonly used HP PJL and Xerox-unique PJL commands.
See also:
HP Printer Job Language Technical Reference for the standard set of PJL commands.
PJL Command
@PJL FSDELETE NAME="pathname"
@PJL FSDIRLIST NAME="pathname"
@PJL FSDOWNLOAD FORMAT:BINARY
SIZE=size NAME="pathname"
@PJL FSINIT VOLUME=value
@PJL FSMKDIR NAME="pathname"
@PJL FSUPLOAD NAME="pathname"
@PJL USTATUS
@PJL USTATUSOFF
@PJL FSAPPEND
@PJL XCLIENTJOBID=value
@PJL XJAFILENAME="filename"
@PJL XJAHOSTNAME="hostname"
@PJL XJAJOBNAME="jobname"
Values
*
*
*
*
*
*
*
n/a
n/a
Exactly 48 bytes
(first byte is 8 and
the 8 last bytes
represent a time in
the format
hhmmsshs.
Roman-8
characters
1-255
Roman-8
characters
1-255
Roman-8
characters
1-255
System Administrator Guide
B-5
Phaser PJL Commands
Description
Deletes a file from the internal
hard drive.
Lists PJL system files and
directories.
Downloads a file to the internal
hard drive.
Initializes the internal hard drive.
Creates the specified directory
on the internal hard drive.
Uploads file from the printer to
the host.
Allows the printer to send
unsolicited status messages for
device status changes,
end-of-job status, and pages
printed. Status can be sent at
specified time intervals.
Turns off all status responses.
Appends data to an existing file,
or if the file doesn't exist, creates
the file and loads it with the given
data.
Sets the client job id used with
PrintingScout.
Sets the file name for Job
Accounting.
Sets the host name for Job
Accounting.
Sets the job name for Job
Accounting.