Input Trays; Output Trays - Xerox 5550B - Phaser B/W Laser Printer Administrator's Manual

Input Trays

The following table lists the most common PCL commands for the input trays supported by
your printer. The table also lists the alternate tray used if the optional input tray is not installed.
Note:
When more than one command is listed, you can use either command.
Input Trays
Tray 1
Tray 1 (MPT) in multi-sheet
mode
Tray 1 (MPT) in manual feed
mode
Tray 2
Tray 3
Tray 4
Tray 5
Autoselect
Current tray/page eject
* The character that follows the "&" in the command is the lowercase letter "L".

Output Trays

The following table lists the PCL commands and PJL values for the output trays supported by
your printer, if applicable.
Output Tray
Top output tray
* The character that follows the "&" in the command is the lowercase letter "L".
** The PJL Value is used with the PJL "OUTBIN" variable.
Phaser 8560
Phaser 6360
PCL 5 Alternate
Command Tray
n/a n/a
<Esc>&l4H n/a
<Esc>&l6H
<Esc>&l2H n/a
<Esc>&l3H
<Esc>&l1H n/a
<Esc>&l5H Tray 2
<Esc>&l8H Tray 1
<Esc>&l20H
<Esc>&l21H Tray 1
<Esc>&l7H n/a
<Esc>&l0H n/a
PCL 5 Command
<Esc>&l1G
System Administrator Guide
B-4
Phaser PCL Commands
Phaser 4510
PCL 5 Alternate
Command
<Esc>&l2H
<Esc>&l3H
<Esc>&l4H
<Esc>&l6H
n/a
n/a
<Esc>&l1H
<Esc>&l21H
<Esc>&l22H
<Esc>&l5H Tray 2
<Esc>&l8H Tray 1
<Esc>&l20H
n/a
<Esc>&l7H
<Esc>&l0H
*
PJL Value
FACEDOWN, UPPER,
STANDARD, or OFFSET
Tray
n/a
n/a
n/a
n/a
n/a
n/a
n/a