Elation Design Spot 1400E Owner's Manual page 33

Preset User mode
This function allows the user to make the actual changes in the user-defined modes
that are accessed through the previous function.
10.8 EDIT PROGRAM:
10.8.1 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in "Function Mode" under
"Program Run."
10.8.2 Edit program – This function allows the user to edit the built-in programs.
10.8.3 Edit Scenes – This function allows the user to edit or define the actual scenes that
are stored in the user defined built-in programs that are accessed in the previous
step.
10.8.4 Auto Scenes rec - The Design Spot 1400E features an integrated DMX recorder by
pre-programmed scenes can be transmitted to the fixture via any standard DMX
controller. This function allows those scenes to be stored in to the fixture's built-in
memory and then subsequently used to create user-defined programs. See working
with built-in programs Section 14 / Page 41.
©Elation Professional® 33 Design Spot 1400E™
Design Spot 1400E™