Kyocera KM-4800w User Manual page 20

• About Default Settings
<Output Size>
Select any of the following output sizes from the pull-down menu.
(1) Original
The output size is as large as output file's original size.
Default setting is "Original".
(2) Percent
Both "X : 100.00%" and "X,Y Separate" are validated.
If you decide the percentage for "X%", output file's original size is enlarged or reduced
depending on your percentage setting.
If you check "X,Y Separate", "Y : 100.00%" is validated also and it becomes possible to
decide horizontal output size (X) and vertical one (Y) separately.
Setting range is from 10.00% to 1000.00% in 0.01% increment.
(3) Standard inch size or standard ISO A series size
Output file's original size is enlarged or reduced to be the selected standard size.
(4) Custom
The following "Custom Size Dialog Box" appears and you can register
output size optionally.
As for the detail, refer to "Explanation of Custom Size Dialog Box".
19
your preferable