Setting Character Attributes; Setting Character Attributes By Label; Setting Character Attributes By Each Line - Brother PT2700 - P-Touch B/W Thermal Transfer Printer User Manual

Setting Character Attributes by Label

Using the key, you can select a font and apply size, width, style, line, and
alignment attributes.
1
Press the
The current settings are displayed.
2
Select an attribute using the
set a value for that attribute using the
3
Press the
New settings are NOT applied if you do not press the
or
• Press the key to return to the previous step.
• Press the
• Refer to the Setting Options table for a list of all available settings.
• Small characters may be difficult to read when certain styles are applied (e.g. Shadow + Italic).

Setting Character Attributes by Each Line

When a label consists two or more lines of text, you can set different value of
character attributes (font, size, width, style, line and alignment) for each line.
Move the cursor to the line you wish to change the
character attribute by using the
press the key while holding down
display the attributes. (
are now applying the attribute for that specific line only.)
When different value of attribute is set for each line, the value
will be displayed as **** when you press the
you change the setting on this screen by using the
the same change will be applied to all lines of the label.

Setting Character Attributes

key.
or
or key to apply the settings.
key.
key to set the selected attribute to the default value.
or
on the screen indicates that you
keys, and then
or keys.
keys. Next,
key to
key. When
or keys,
Setting Character Attributes
1
2
3
4
5
6
7
8
9
31