Printing A Single Copy; Printing Multiple Copies - Brother PT2700 - P-Touch B/W Thermal Transfer Printer User Manual

Printing a Single Copy

1
Make sure that the appropriate tape cassette is inserted and ready for printing.
2
Press the
The message shown on the right is displayed while
the label is being printed.
To stop printing, press the
There are several other messages that may appear when you press the
Messages" on page 75 for further information about error messages.

Printing Multiple Copies

Using this function you can print up to 99 copies of the same label.
1
Make sure that the appropriate tape cassette is inserted and ready for printing.
2
Hold down the
display the print options screen, and then select
"Copies" using the
3
Press the
and then select the number of copies to be printed
using the or
number keys.
Hold down the
copies faster.
4
Press the
The message shown on the right is displayed while
the labels are being printed.
• Press the key to return to the previous step.
• Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to "Tape
Cutting Options" on page 62 to change this setting.
• The figures shown on the screen during printing indicate the "count / number of copies set".
• Pressing the
default.
key.
key to turn off the P-touch labeler.
key and press the
or keys.
or key to display the Copies screen,
keys, or type the number using the
or keys to change the number of
or key.
key when setting the number of copies resets the value to 1, the
key. Refer to "Error
key to
1
2
3
4
5
6
7
8
9
59
Printing a Label