Using The File Memory; Storing A Label Into Memory - Brother PT2700 - P-Touch B/W Thermal Transfer Printer User Manual

USING THE FILE MEMORY

You can store up to 99 of your most frequently used labels in the file memory. Each
label is stored as a file, allowing you to quickly and easily recall your label when needed
again.
• When the file memory is full, each time you save a file you will need to overwrite one of your
stored files.
• You will lose your stored files if the AC adapter is disconnected and the batteries are removed
for more than one minute.
1
After entering the text and formatting the label, press
the
2
Select "Save" using the
3
Press the
A file number is displayed.
A label text is also displayed if a label is already stored
in that file number.
4
Select a file number using the
press the
selected file number.
The file is saved and the screen returns to the text
entry screen.
When there is already a stored file in the selected
number, the data will be overwritten by the file you try
to save.
• Press the
• Up to 280 characters can be saved in one file, depending on the number of lines. However,
there is a maximum of 2800 characters for the total number of characters saved in up to 99
files. Text and layout formatting data is also saved in the file.
• To store a label created by using the Auto-Format Layouts, refer to "Using Auto-Format
Layouts" on page 38.
66

Storing a Label into Memory

Storing a Label into Memory
key to display the File screen.
or
or key.
or key to save the label under the
key to return to the previous step.
keys.
or key, and then