Printing A Banner - Lexmark Z65 Color Jetprinter Online User's Manual

Lexmark Z65
Lexmark Z65n
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Using this
Guide...

Printing a banner

Note: Some software applications and some operating systems do not support
banner printing.
Step 1: Load the banner paper
Make sure your banner paper is not used or damaged.
1
Remove any paper from paper tray 1.
2
Tear off enough pages for the banner including one extra sheet, and then place them
behind the printer.
3
Load the unattached, leading edge of the
first page into the printer with the right side
against paper tray 1.
Note: Forcing the paper too far into
the printer may cause a paper
jam. For help, see
paper misfeeds or
4
Squeeze and slide the paper guide to the
left edge of the banner paper.
www.lexmark.com
Clearing
jams.
Printing ideas 47