Lexmark Z65 Color Jetprinter Online User's Manual page 17

Lexmark Z65
Lexmark Z65n
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Using this
Guide...
Use this:
Ethernet cable connector
Front cover
Network connection speed
light
Network link light
Paper exit tray
Paper tray 1 (front)
Paper tray 2 (rear)
www.lexmark.com
When you want to:
Connect the printer to a network with an RJ-45 (Category 5)
Ethernet cable.
• Install or change print cartridges.
• Clear a paper jam.
See how quickly your network is transmitting data.
• When it flashes, your network is transmitting data at 100
Mbps.
• When it is on, your network is transmitting data at 10 Mbps.
See if your network is properly connected (the light is on).
Stack paper after printing.
Print on most types and sizes of paper. This tray has a paper type
sensor and should be used as the main paper tray. For more
information, see Using the paper type
number icon so you can match it with the appropriate paper tray
button.
Print on various paper types. The default setting for this paper
tray is for plain paper. This tray does not have a paper type
sensor. Check the number icon so you can match it with the
appropriate paper tray button.
Printer overview
sensor. Check the
17