2-2. Connecting the Signal Cable
NOTE
• Be sure that the Power buttons of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
FD-C16 or MD-C100
enclosed
FD-C16 or MD-C100
enclosed + Adapter*
Digital Input
FD-C39
(Optional)
NOTE
• The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple
Display Connector)
D-Sub mini 15 pin
MD-C100
Signal Cable
FD-C39 (Optional)
Signal Cable
DVI
Power Cord
FD-C16
Connector of PC
Video Output
Connector D-Sub mini
15 pin
Video Output
Connector D-Sub 15
pin
DVI
Power Cord
Connector of PC
Video Output
Connector DVI
2. CABLE CONNECTION
English
PC
•
Standard graphics card
•
Macintosh G3 (Blue &
White) / Power Mac G4
(VGA)
•
Macintosh
*Macintosh Adapter (Optional)
PC
•
Power Mac G4 (DVI)
•
Digital graphics board
13