Eizo FlexScan L695 User Manual page 16

Eizo nanao color lcd monitor user's manual l695
Table of Contents

Advertisement

English
Selecting the Active Input
The Input signal selection button on the control panel can be used to select either Signal
1 or Signal 2 as the active input at any time. Every time the button is pressed, the input
changes. When switching the signal, the kind of the input signal (Signal1/ Analog or
Signal 2/Analog or Digital) is displayed for a few seconds on the right top corner of the
screen.
NOTE
• When using the ActiveShot function (p. 31), pressing the Input signal selection
button switches the image of the Main window and the Sub window.
The Priority Input Signal
This function is used to select which PC will have priority to control the monitor when
utilizing two PCs. The monitor constantly checks the input signals and switches
automatically in accordance with the "Input Priority" setting (see table below). Once a
priority is set, whenever a change of signal is detected at the selected input, the monitor
will switch the input to that signal.
In the case of only one signal being present at either input, the monitor automatically
detects and displays that signal.
Priority
Setting
Signal 1
Signal 2
Manual
NOTE
• About Power saving mode
When the Signal 1 or Signal 2 is selected, the power saving mode of the monitor
operates only if both PCs are in power saving mode.
16
2. CABLE CONNECTION
Input Signal Selection Button
SIGNAL
AUTO
ENTER
1 - 2
If signals from both inputs are present, the monitor gives preference to Signal
1 in the following cases.
When the power of the monitor is turned ON
When the signal input to Signal 1 is changed even if active input was Signal
2.
If signals from both inputs are present, the monitor gives preference to Signal
2 in the following cases.
When the power of the monitor is turned ON
When the signal input to Signal 2 is changed even if active input was Signal
1.
The monitor will not detect signals automatically in this mode. Select the
active input by pressing the input signal selection button on the monitor's
control panel.
Performance

Advertisement

Table of Contents
loading

Table of Contents

Save PDF