Table of Contents
Advertisement
English
NOTE
• If the user's operating system has no utility disk (e.g. OS/2), we recommend
setting the desktop pattern to that as shown in the diagram on the following
page.
3.
Adjust by using <Screen> menu in the ScreenManager.
(1) Vertical bars appear on the screen
→
Select the "Clock" and eliminate the vertical bars by using the right and left of
the control buttons. Do not continuously press the control buttons, as the
adjustment value will change quickly and make it difficult to locate the most
suitable adjustment point.
If the horizontal flickering, blur or bars appear, proceed to "Phase" adjustment
as follows.
NOTE
• When adjusting the <Clock>, the horizontal screen size will also change.
(2)
Horizontal flickering, blurring or bars appear on the screen.
→
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by
using the right and left buttons.
NOTE
• Horizontal bars may not completely disappear from the screen depending on
the PC.
22
4. ADJUSTMENT
Use the <Clock> (p. 48) adjustment.
Use the <Phase> (p. 48) adjustment.
Advertisement
Table of Contents
