Table of Contents
Advertisement
3-3
Useful Functions
.
Adjustment Lock
Use the "Adjustment Lock" function to prevent any accidental changes.
Locked function
Unlocked function
[To lock]
(1) Switch off the monitor's power by the power button on the control panel.
(2) Press on the Auto adjustment button while switching on the monitor's power.
[To unlock]
(1) Switch off the monitor's power by the power button on the control panel.
(2) Hold down the Auto adjustment button once again and turn the power back on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state after
a predetermined amount of time has lapsed. This function was created to reduce
afterimage (
p.
screen is left on for a long period without use.
[Procedure]
(1) Select <Off Timer> in the ScreenManager "Others" menu.
(2) Select "Enable" and press the right and left buttons to adjust the "On Period" (1 to
23 hours).
[Off timer system]
On Period (1H - 23H)
Last 15 min. in "On period"
"On period" expired
*1
Advance notice (Power indicator flashing blue) will be given 15 minutes before the monitor
automatically enters the "Power Off" mode. To delay entering the "Power Off" mode, press the
power button during the advance notice period. The monitor will continue to operate for an
additional 90 minutes.
[Power Resumption Procedure]
Press the power button to return to a normal screen.
NOTE
• The off timer function works while the PowerManager is active, but there is no
advance notice before the monitor's power is switched off.
•
Auto adjustment button adjustments and settings in the
ScreenManager.
•
Auto Adjustment Button
•
PinP Button
•
Adjustment of contrast and brightness by the control buttons.
•
Input Signal Selection Button
48) characteristics that are particular to LCD monitors when the monitor
PC
Operation
Advance Notice
Power off
Monitor
Blue
*1
Blue Flashing
Flashing yellow slowly
English
Power Indicator
3. ScreenManager
19
Advertisement
Table of Contents
