Connecting Two Pcs To The Monitor - Eizo FlexScan L695 User Manual

5.
Turn on the monitor's main power and then switch on the PC's
power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the "TROUBLESHOOTING" (p. 40) for
advice.
Whenever finished, turn off the PC and the monitor.
6.
When using the monitor in portrait style, refer to the "6.
ActiveRotation Function" (p. 35).
NOTE
• When turning on the monitor, the kind of the input signal (Signal1/ Analog or Signal
2/Analog or Digital) is displayed for a few seconds on the right top corner of the
screen.
• Adjust brightness of the screen depending on the brightness of your environment.
• Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

2-3. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the
back of the monitor.
Connecting Examples
(Ex.1) Analog D-Sub
mini 15
pin
(Ex.2) Analog D-Sub
mini 15
pin
Signal 1
PC 1
Signal Cable
(MD-C100 enclosed)
Signal Cable
(MD-C100 enclosed)
Signal 2
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C39 Optional)
2. CABLE CONNECTION
English
PC 2
D-Sub Analog
mini
15 pin
DVI Digital
15