Relay User Box - Konica Minolta bizhub C220 User Manual

8.2 User mode settings

Relay User Box

You can create up to five Relay User Boxes. The creation and editing setting items are as follows.
Reference
- To change the setting of a created User Box, select the target User Box and press [Edit].
- If [Edit] is selected, you cannot change the User Box number.
- To delete a created User Box, select the target User Box and press [Delete].
Item
[User Box No.]
[User Box Name]
[Relay Destination]
[Relay TX Password]
d
Reference
For details on how to register the header or footer, refer to the [User's Guide Network Scan/Fax/Network Fax
Operations].
bizhub C360/C280/C220
Description
Automatically displays an unassigned number. To specify a User Box
number, press [User Box No.], and use the keypad to enter the User Box
number between 1 and 999999999.
Press [User Box Name], and enter the User Box name in the control panel
(up to 20 characters). Specifying different User Box numbers enables you
to create User Boxes with the same name.
Select a relay destination to send data from the Relay User Box. Pre-reg-
ister the relay destination as a group destination.
• When registering a group destination as a relay destination, be sure to
set Abbreviation Dial in the group destination in advance.
Specify a password to limit access to the User Box. Press [Relay TX Pass-
word], and enter the password in the control panel (up to 8 characters).
8
8-8