Asus Maximus II Gene User Manual page 173

Debug code table
Code Description
Clear EPA or customization logo.
1. Call chipset power management hook.
PASSWORD
2. Recover the text fond used by EPA logo (not for full screen logo)
3. If password is set, ask for password.
Initialize PnP boot devices
1. USB final Initialization
2. NET PC: Build SYSID structure
3. Switch screen back to text mode
USB FINAL 4. Set up ACPI table at top of memory.
5. Invoke ISA adapter ROMs
6. Assign IRQs to PCI devices
7. Initialize APM
8. Clear noise of IRQs.
INIT ROM Initialize device option ROMs.
1. Program daylight saving
NUM LOCK
2. Update keyboard LED & typematic rate
1. Build MP table
2. Build & update ESCD
UPDT DMI 3. Set CMOS century to 20h or 19h
4. Load CMOS time into DOS timer tick
5. Build MSIRQ routing table.
INT 19H Boot attempt (INT 19h)
Manufacturer
Address, City
Country
Authorized Representative in Europe ASUS COMPUTER GmbH
Address, City
Country
ROG Maximus II GENE
ASUSTek COMPUTER INC.
No. 15, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN
R.O.C
TAIWAN
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
A-3