Eizo FlexScan L360 User Manual page 8

OK
8
PRECAUTIONS
• Periodically clean the area around the plug.
Build-up of dust, water, or oil on the plug may result in fire.
• Please keep the LCD monitor in a dust-free environment.
Dust accumulation within the LCD monitor may result in fire or
equipment failure.
• Do not touch the plug or the power unit with wet hands.
Touching the plug with wet hands is dangerous and can cause
electrical shock.
• When handling the LCD monitor, please refer to the
diagram.
Grip the bottom of the LCD monitor firmly with both hands
ensuring the panel faces outward before lifting.
• Handle with care to avoid scratching or damaging the
panel.
If the LCD monitor becomes damaged, disconnect the power
immediately and have the unit checked by a qualified service
engineer before using it again. Using a LCD monitor after it has
been dropped may result in fire or electric shock.
• Disconnect the power cord and/or the power unit when
moving the LCD monitor.
Moving the LCD monitor with the cord attached or lifting it is
dangerous. It may result in injury or equipment damage.
• When handling the power unit, do not do so by the cord
(free mount type only).
Doing so may cause damage and could result electric shock.
• Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in
case of a problem.
• When handling the power unit, be careful as it may be hot
(free mount type only).
* Do not place or cover the power unit with any objects;
especially carpets or cloth. Doing so may result in fire.
* Keep direct sunlight or heat generating devices such as a
heater away from the power unit.
* Touching the power unit with bare hands may result in a
burn.