Eizo FlexScan L360 User Manual page 19

c) Insert the rear cover into the inlets at the bottom of the stand.
d)Close the rear cover while pushing the push buttons on the top.
(7) Plug the power cord into the power connector in the rear of the LCD
monitor. Plug the other end into a power outlet.
(8) Turn on the monitor's main power and then switch on the PC power.
(9) This completes the installation. Turn off the main power when you
finish using it.
• Do your part to conserve energy, turn off the monitor when you are
finished using it.
How to remove the connector cover and the rear cover of the
LCD monitor.
Inlets
Rear cover
buttons
1
19
INSTALLATION
E