Eizo FlexScan L360 User Manual page 40

14 preset timings have been committed to memory. In addition to these
settings, a screen can be displayed correctly using the "Clock", "Phase" and
"Position" adjustments if the input signal is one of the following resolutions
(640 x 480, 720 x 400, 800 x 600, 832 x 624, 1024 x 768).
If the signal is very different from one of the preset resolutions, then the
screen can be adjusted using the "Resolution" Adjustment.
The vertical resolution can be adjusted using the up and down buttons,
and the horizontal resolution can be adjusted using the right and left
buttons. When pushing the up or right buttons, the resolution is increased.
When pushing the down or left buttons, the resolution is decreased.
• The maximum resolution for the EIZO L360 LCD monitor is 1024 x 768.
5. Contrast Adjustment
This feature controls the contrast of the screen. The contrast is changed by
adjusting the gain level of the input signal to obtain the maximum contrast
(0 ~ 63, 64 levels).
Adjustment procedure
(Auto)
(1)Push the Auto adjustment button on the front panel while displaying the
"Contrast/Brightness" menu to automatically adjust the contrast.
(2)The screen blanks for a moment, and adjusts the contrast to the
maximum contrast level of the current input signal.
(Manual)
Adjust the contrast level using the right and left buttons until the
percentage color is on the border of white and orange or fully orange.
40
2 USING THE SCREENMANAGER
OK
Bright area is displayed too
whitish.
Too high
Too low