Eizo FlexScan L360 User Manual page 34

Procedure
Please adjust the screen using the following procedure.
(1) Having read the "readme.txt" file, install and run the "Screen
Adjustment Program" in the utility disk.
Step by step adjustment is provided by the wizard guide. Follow the
wizard or the procedures (2) to (8) below.
• If the user's operation system has no utility disk (e.g. OS/2), we
recommend setting the desktop pattern to that as shown in the diagram
below.
(2) Auto Adjustment
Push the Auto adjustment button on the front panel. The following
message will appear and remain on the screen for 5 seconds. While the
message is on the screen, push the button again to automatically adjust
the screen position. If you do not wish to do adjust the screen, do not
push the button again. The message will disappear.
• The Auto adjustment function is intended for use on Macintosh and PCs
running Windows. It may not function properly if any of the following
applies:
• PC running MS-DOS (not Windows).
• The background color for the "wallpaper" or "desktop" pattern is
• Some signals from some graphics boards may not function
34
2 USING THE SCREENMANAGER
set to black or dark.
properly. Follow the adjustment procedure next page.
Every-other-dot pattern